TIE ROD &/OR END – Remove & Replace – Outer,One Side – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models
Road test and verify engine performance, transmission operation, and shift patterns. Flush transmission which includes: flushing of transmission cooler, cooler lines, valve body, and torque converter. Flush all contaminated fluid out and replace with new fluid as per vehicle specs.
A/C SERVICE
ALTERNATOR DRIVE BELT – Remove & Replace – Base,V6 – [Includes: Serpentine and V-Belt type Belt(s).]
BOBBIE R. gave our service a 5 star review on 6/11/2021
ALTERNATOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures.
STEERING DAMPER – Remove & Replace – F250 Super Duty,F350 Super Duty
TIE ROD &/OR END – Remove & Replace – F250 Super Duty,F350 Super Duty Inner or Outer – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inn
$50 OFF SERVICE
REGINA M. gave our service a 5 star review on 3/30/2021